In this post, you can easily know about How To Factory Reset Linksys Velop Router. A factory reset takes your velop system back to the state it was in when it was a brand new one.

However, resetting the velop system as well as configuring it is kind of troublesome. So you have to perform the setup process again. All settings you have customized in setup and since things such as Wi-Fi name, passwords, security type will be erased. All the wireless devices will be disconnected from your Wi-Fi, once you Reset Linksys Velop system.

Linksys Velop (WHW03) default Password, Login & Gateway settings

If you have performed a reset of your Velop (WHW03) device or not changed the defaults, you should be able to access it with the following settings

• Default Network name (SSID): VelopSetupXXX

• Default subnet mask: 255.255.255.0

How to factory reset (hard reset) Linksys Velop (WHW03)

You can factory reset your Linksys Velop (WHW03) in the following way(s):

• Through the web interface
• Open your browser and navigate to the router interface (see default settings below)
• Under the Administration tab, you will find a sub-tab called Factory defaults
• On the Factory defaults page, click the button labeled Restore Factory Defaults
• With the reset button
• Have your unit powered on
• Press and hold the reset button for at least 10 seconds until the power light starts blinking, then release.
• When the power light goes solid, unplug the power to the router for 10 seconds
• Plug the power back in and start the router
• When the power light goes solid again, the router is ready to use.

Linksys Velop (WHW03) router specifications

System specs

• CPU: 716 MHz
• RAM: 512 MiB
• Flash: 4096 MiB
• Custom firmwares: None

Connectivity

• Wi-Fi: Gigabit (abgn+ac)
• Wi-Fi bands
• 2.4GHz & 5GHz
• Wi-Fi throughput: 2200 Mpbs
• WAN
• 1 x Gigabit port
• ETH
• 1 x Gigabit port
• USB-ports: 0
• Velop (WHW03) Firmwares
• Staying up to date with the latest firmware is a good idea to keep your router even more secure from various security flaws.
• If you want to squeeze a bit of extra functionality out of your router, consider flashing an open-source firmware like dd-wrt, openWRT or LEDE.
• Flashing a custom ROM can greatly increase the stability and functionality of your old router.
• Following are the firmwares that we have identified existing for the Linksys Velop (WHW03)
• Linksys stock firmware for the Velop (WHW03)
• Stock firmwares for the Velop (WHW03) are available under the download section on the modem’s support page.
• You can also refer to the router’s manual for instructions on how to upgrade the firmware.

Follow the Below Steps to Set up Linksys Velop System

• Now, through the Linksys app, set up the primary node.
• Again through the Linksys app, add a secondary node using the wireless setup.
• After the setup is completed, place the secondary node in the location where you want to move it, and then connect it to a power outlet.
• Next, by using an Ethernet cable, connect the secondary node to the primary node. The nodes will itself switch to an Ethernet wired connection.
• Lastly, use the Linksys app to add the other nodes as well.
• After the setup is done, use an Ethernet cable to connect them.
• You are done setting up your Linksys velop system.

Linksys Velop system mesh Wi-Fi is an interconnected series of nodes that ensures complete signal coverage to all or {any|to any or all} your devices. With Intelligent Mes Technology, it goes a step ahead that focuses on the local area network signal strength supporting your current location at your home. Linksys velop system offers you a full strength signal all around your home.

It allows you to connect all your smart, home automation, appliances, and voice controlled devices including Alexa. It provides you the Linksys app, from which you can control all your devices as well as Wi-Fi anytime, anywhere.

The features are easy to access and include security control which allows you to keep your network protected and secure, automatic updates, and guest access as well which will provide your guests.