In this post, you can easily know about How To Reboot Netgear Router. To access the router reboot, it is important that you are connected to the router.

When facing issues with your NETGEAR router, sometimes performing a reboot of the router can help resolve these issues. This article will guide on how to reboot your NETGEAR router through the router’s interface.

To reboot NETGEAR router using the router’s interface

• Open a web browser on a computer or Wi-Fi device that is connected to your NETGEAR router.
• Type http://www.routerlogin.com or http://www.routerlogin.net in the web browser address bar.
• You are prompted to log in to your router.
• Enter admin for the username and password for the password.
• If you changed your admin password, enter the password that you created.
• NETGEAR genie displays.
• Click Advanced.
• Under Router Information, click Reboot. Wait for 2 minutes for the router to complete the reboot process.

To Reboot Netgear Router from Browser and fix its issues

To perform a reboot Netgear Router, you can follow any of the below-mentioned methods:

1st Method: Using Power Button

• Switch off the Netgear Router by pressing the power button on the router.
• Wait for about 30 seconds.
• Press the power button again to switch on the device and continue to reboot Netgear Router from the command line.
• Your Netgear Router reboot is completed.

2nd Method: Using a Web Browser

This method of rebooting your Netgear Router also answers your query of how to reboot Netgear Router from browser. Let’s have a look at the steps and fix the Netgear router not working issue:

• Open a web browser on your computer or any wireless-enabled device connected to the Netgear Router.
• Type www.routerlogin.com or 192.168.1.1 on the browser’s address bar and press Enter to perform a Netgear Router login.
• When prompted, enter the router login credentials (username and password).

• Now, click on the “Advanced” option.
• Click on “Reboot” under Router Information.
• Wait until the router completes the reboot process. This is called a Netgear Router auto reboot process. In case you encounter any challenges during the process, refer to the Netgear Router manual.

How Do I Reboot My Netgear Router From The Browser?

The Remote Access procedure is helpful when you are away from your home or if your Netgear Router isn’t easily accessible. Here’s how you can perform this:

• At first, you need to open the Netgear Nighthawk app on your mobile phone.
• Next, you are supposed to tap on the “Connect Remotely” option to open the Nighthawk dashboard.
• In the next step, it is recommended to go on the top-left of your mobile screen, tap on the home icon.
• Next, make sure you tap on reboot and select the “Reboot” option.
• Wait until the rebooting screen is displayed and the router reboots.

The Functioning Of Netgear Router after Reboot

Once the Netgear Router auto reboot is done, it sends data packets from one network to another. Once the router joins another network, it routes the data traffic in it. With their highly advanced features, Netgear Routers allow you to wirelessly connect devices and browse the internet. The Beam Forming+ technology enables the Netgear Router to provide you high-speed internet accessibility. Most of them are dual-band routers that don’t interfere with other wireless network frequencies. All you need to do is enable the Wi-Fi feature on your device, locate the SSID, tap on it, enter the appropriate network key, and connect to the internet.

Instances may arise when you need to perform a fresh configuration of the router. In such cases, simply visit 192.168.1.1, enter the router login credentials, and make the required changes.