In this post, you can easily know about How To Reset AT&T U-verse Router. AT&T is a multinational corporation from America that provides a wide range of services.

If you’re having trouble with your AT&T U-verse router, such as if you can’t properly connect to the internet, try restarting the router by unplugging it, leaving it for a few seconds and plugging it back in. If that doesn’t help, you can start restoring it to its factory settings. If you have problems or questions at any point, or your AT&T U-verse modem won’t reset, consider contacting AT&T for help.

What is a Router Reset?

There is no doubt that you have heard of “Reset” many times before, and we believe that you have used it on many devices. You can reset your computer, phone, router, etc. The procedure is not complicated and can be very useful.

In this article, we specifically talk about resetting the router. Knowing how to perform this action properly is particularly important in an unpleasant situation when we forget the Wi-Fi password, which is a very common occurrence among users.

It is important to note that resetting the router means deleting absolutely all the settings you have entered, including the Wi-Fi password, network name, parental control settings, guest networks, and so on. After deleting, all the settings will be restored to the factory.

To use your Wi-Fi again after resetting, you will need to reconnect using the default credentials (usually located on the back of the router).

How to Reset AT&T U-verse Router?

This is an extremely simple procedure.

• First, find the Reset button on the back of the router.

• You need to press and hold the Reset button for at least 15 seconds and then release it (the button is placed in the hole, so you use a paper clip or similar object to press it).

• That’s the whole process – your router will reset after 15sec.

• All devices that have been connected to your Wi-Fi will automatically disconnect after you reset your U-Verse router, and you must use the default credentials to reconnect them.

You Should Restart Your AT&T Wi-Fi Gateway

Consider resetting your AT&T Wi-Fi gateway or router if you’re having problems connecting to it from your home devices or can’t access the internet after you’re connected. To begin, disconnect the gadget from the wall or power strip it is connected to. You’ll also want to disconnect the phone connection from the device if it’s a digital subscriber line, or DSL, a modem that connects through a regular phone line.

Remove the internal battery if the router has one for backup, and unplug the router from all power sources. Make a mental note of how the battery goes into the gadget, so you can correctly replace it. If you’re not sure if it has a battery, read the paperwork that came with it or seek online using another device linked to the internet, such as a mobile phone connected to the cell network.

Wait 20 seconds after all power has been unplugged. Then, if you have one, replace the battery and reconnect the gadget to the phone line if necessary, as well as the power outlet. Return the gadget to its original location and wait up to 10 minutes for it to restart.

Reset the Factory Settings on Your Router

You can reset your router to factory settings if restarting it isn’t enough. Any custom modifications you’ve made to its setups, such as selecting a custom Wi-Fi network name or a specific IP address, will be lost.

Hold the reset button on the AT&T router for at least 10 seconds to restore factory settings. Wait for all the lights to turn green, then double-check that the broadband or status light remains solid green. The AT&T U-verse modem will not reset its factory settings if you don’t press the button down long enough, however it may reboot.

U-verse Modem Lights from AT&T

If your AT&T U-verse modem isn’t working, the lights on it might help you figure out what’s wrong. There are usually indicators that indicate the condition of the modem’s connection to Wi-Fi, electrical power, battery life, and the AT&T external network.

Each of these lights has a variety of color-coded states that may be used to show the device’s condition. To figure out what the lights are attempting to tell you, go to AT&T’s website and look up your modem’s online documentation.

Other Suggestions for Troubleshooting

If you’re an AT&T client who’s having problems with your internet router, you may always call AT&T for help. If you don’t have AT&T, contact your own internet provider.

To begin, it may be beneficial to try to narrow down the issue. Check to see whether several devices are experiencing issues connecting, or if only one is, in which case it might be a device issue. Check the modem lights to see what they’re reporting and see if it fits your experience.

You may also try changing any physical cords hooked into the router, such as phone and Ethernet connections, if they have been broken.

What should the lights on my ATT U-verse modem be?

The Wi-Fi Gateway is turned on if the power indicator is solid green. If the power light is blinking red, the machine is doing a self-test to ensure appropriate operation.

The solid red power light indicates a problem, it indicates a problem: the device is unable to boot up or a fault has occurred.