On this page, you can get information about How To Reset Reolink Camera easily. Reolink cameras are Wi-Fi security cameras that support the 2.4 GHz or 5 GHz band. The DC adapter powers the camera and broadcasts videos via your router’s Wi-Fi connection.
Reolink Wi-Fi security cameras can be installed anywhere with enough power and Wi-Fi connectivity without needing an Ethernet cable. The Reolink Wi-Fi security cameras have the following functions available for a robust home security system.
Table of Contents
How do I Reset my ReoLink Camera by Pressing the Reset Button
I can reset my Reolink camera by pressing the reset button. It all depends on where the reset button is located.
ReoLink Wi-FI and PoE Cameras:
For Wi-Fi and PoE cameras by Reolink, press their reset button, then hold on.
Afterwards, power on the camera while still pressing the reset button.
Hold the reset button for about 10 seconds before releasing it.
After reset is done, the camera should return to factory or default settings. Just login with the default username and password to set up the device anew.
ReoLink Keen and C Series:
In order to reset Reolink Keen, C1, C1 Pro, C2, and C2 Pro, press and hold for about 10 seconds before release.
The cameras will give reminders of the reset if done properly. For Keen, it will sound the prompt, “Factory Reset Succeeded”.
For C Series cams, it will start to pan and tilt. Use the default username and password after factory reset.
ReoLInk Argus Series:
In order to reset Reolink Argus, Argus 2, and Argus Pro insert a needle into my camera’s reset hole.
Then press and hold for several seconds until hear the prompt of “Factory Reset Succeeded” or beeping.
This means my camera has been successfully put back to default settings. It’s the same deal with Argus Eco, but the prompt is instead a short beep music or the words, “Please release the reset button”.
ReoLink E Series and ReoLInk Go:
To reset the Reolink Go, insert the reset needle into the reset hole and press and hold for 3-5 seconds. Release when I hear a short piece of music.
It’s the same when resetting the Reolink E series cameras such as Reolink E1, 3MP/4MP/5MP E1 Pro, E1 Zoom, and so forth. A single press leads to a soft reset while more than 5 seconds results in a hard reset to factory settings.
How do I Reset my Reolink Bullet or Dome Camera
If the model of my Reolink camera is Bullet or Dome, I can reset it by doing the following.
First turn off the camera.
Now press and hold the Reset button, then power on the camera while still holding the Reset button.
Next, hold the Reset button for roughly 10 seconds before releasing it.
After I have reset Reolink camera successfully, log in with the default name and password and reset my account.
How do I Reset my Reolink Keen, C1, C1 Pro, C2, or C2 Pro
The basic steps provided below will help to reset Reolink Keen, C1, C1 Pro, C2, or C2 Pro.
In the reset hole, insert a pin or needle.
Now hold the button down for around 10 seconds before releasing it.
The camera will send reset reminders.
After The prompt, Factory reset accomplished will be heard for Reolink Keen.
It will pan and tilt for the C1, C2, C1 Pro, and C2.
After I have reset Reolink camera successfully, log in with the default name and password and reset my account.
How do I Reset my Reolink Argus PT
If I use the Argus PT Reolink camera, the steps below to reset Reolink camera.
First turn on the Argus PT camera via the power button.
To find the reset hole, rotate the lens.
After that, slide the reset needle into my camera’s reset hole.
Press and hold the reset button for several seconds. Then release the reset button. That’s it.
Reset Reolink Camera by using Reolink App
I can also reset Reolink camera using the Reolink app on my mobile phone by following steps.
Firstly, login to my Reolink camera account using the Reolink App.
Now open Device Settings, then navigate to More interface.
Next, scroll down the page and click the Restore button to reset the camera. Wait a bit for it to finish.
Then the old password will be erased after the reset.
I can now use the default username and password to log in.