On this page, you can get information about How To Reset Reolink Camera easily. Reolink cameras are Wi-Fi security cameras that support the 2.4 GHz or 5 GHz band. The DC adapter powers the camera and broadcasts videos via your router’s Wi-Fi connection.
Reolink Wi-Fi security cameras can be installed anywhere with enough power and Wi-Fi connectivity without needing an Ethernet cable. The Reolink Wi-Fi security cameras have the following functions available for a robust home security system.
Table of Contents
How do I Reset my ReoLink Camera by Pressing the Reset Button
I can reset my Reolink camera by pressing the reset button. It all depends on where the reset button is located.
- ReoLink Wi-FI and PoE Cameras:
- For Wi-Fi and PoE cameras by Reolink, press their reset button, then hold on.
- Afterwards, power on the camera while still pressing the reset button.
- Hold the reset button for about 10 seconds before releasing it.
- After reset is done, the camera should return to factory or default settings. Just login with the default username and password to set up the device anew.
- ReoLink Keen and C Series:
- In order to reset Reolink Keen, C1, C1 Pro, C2, and C2 Pro, press and hold for about 10 seconds before release.
- The cameras will give reminders of the reset if done properly. For Keen, it will sound the prompt, “Factory Reset Succeeded”.
- For C Series cams, it will start to pan and tilt. Use the default username and password after factory reset.
- ReoLInk Argus Series:
- In order to reset Reolink Argus, Argus 2, and Argus Pro insert a needle into my camera’s reset hole.
- Then press and hold for several seconds until hear the prompt of “Factory Reset Succeeded” or beeping.
- This means my camera has been successfully put back to default settings. It’s the same deal with Argus Eco, but the prompt is instead a short beep music or the words, “Please release the reset button”.
- ReoLink E Series and ReoLInk Go:
- To reset the Reolink Go, insert the reset needle into the reset hole and press and hold for 3-5 seconds. Release when I hear a short piece of music.
- It’s the same when resetting the Reolink E series cameras such as Reolink E1, 3MP/4MP/5MP E1 Pro, E1 Zoom, and so forth. A single press leads to a soft reset while more than 5 seconds results in a hard reset to factory settings.
How do I Reset my Reolink Bullet or Dome Camera
If the model of my Reolink camera is Bullet or Dome, I can reset it by doing the following.
- First turn off the camera.
- Now press and hold the Reset button, then power on the camera while still holding the Reset button.
- Next, hold the Reset button for roughly 10 seconds before releasing it.
- After I have reset Reolink camera successfully, log in with the default name and password and reset my account.
How do I Reset my Reolink Keen, C1, C1 Pro, C2, or C2 Pro
The basic steps provided below will help to reset Reolink Keen, C1, C1 Pro, C2, or C2 Pro.
- In the reset hole, insert a pin or needle.
- Now hold the button down for around 10 seconds before releasing it.
- The camera will send reset reminders.
- After The prompt, Factory reset accomplished will be heard for Reolink Keen.
- It will pan and tilt for the C1, C2, C1 Pro, and C2.
- After I have reset Reolink camera successfully, log in with the default name and password and reset my account.
How do I Reset my Reolink Argus PT
If I use the Argus PT Reolink camera, the steps below to reset Reolink camera.
- First turn on the Argus PT camera via the power button.
- To find the reset hole, rotate the lens.
- After that, slide the reset needle into my camera’s reset hole.
- Press and hold the reset button for several seconds. Then release the reset button. That’s it.
Reset Reolink Camera by using Reolink App
I can also reset Reolink camera using the Reolink app on my mobile phone by following steps.
- Firstly, login to my Reolink camera account using the Reolink App.
- Now open Device Settings, then navigate to More interface.
- Next, scroll down the page and click the Restore button to reset the camera. Wait a bit for it to finish.
- Then the old password will be erased after the reset.
- I can now use the default username and password to log in.