Hard Reset D-Link Router

Hard Reset D-Link Router

If you forgot the password and have any problems with the D-Link router, it’s miles necessary to reset it. Resetting the router changes all settings to its factory settings.

There are various scenarios required to reset the router. The process of how to reset the D-Link router is quite simple.

Right here you can without problems Reset the D-Link WiFi router at no cost. you can reset the D-Link router with the button or web-based Configuration utility.

Factory resetting the router will erase all changes you made to the router. internet/wi-fi Settings will want to be reconfigured.

Router List

Difference between Reset and Reboot

It’s miles important to know the difference between Reset and Reboot, they’re two different things. Rebooting something is a common task that you can do on all sorts of devices in the event that they’re not performing as you expect. you can restart a router.

A restart/reboot is a single step that involves both shutting down and then powering on something.

Master reset, factory reset, restore, and hard reset are synonyms for resetting everything. when you reset the device it will restore like a new device.

Resetting entails changing the router settings back to their factory defaults. First, you need to hard reset the router then you can use the default password to access your router.

D-Link Reset with Button

This is the simplest way to reset the D-Link WiFi router. All routers have this Reset button. Reset delete all internet or and wireless settings to your device.

Method – 1

  • Verify that your router is currently turned on and plugged right into a power source.
  • Subsequently, discover the round Reset button on the back or bottom of your router.
  • Take the end of a paperclip or pin.
  • In this step, press and hold down the Reset button for about 15 seconds.
  • The router will restart and it’s going to take few seconds to finish the reset.

Method – 2

  • Unplug the power adapter from your router.
  • In this step, locate the Pair button on the router.
  • Subsequently, hold down the Pair button and plug in the power adapter again.
  • Release the Pair button after the power LED light starts off evolved flashing.
  • The LED light turns to blue when the reset is complete.
  • Finally, the Router will automatically reboot.

Method – 3

  • Turn off your router.
  • After that, locate the Set button at the router.
  • Subsequently, hold down the Set button and turn on your router.
  • Release the Set button after 20sec, LED light is flashing in red color
  • Finally, the Router will automatically reboot.

Method – 4

  • Turn off your router.
  • In this step, locate the WPS button on the router.
  • Subsequently, hold down the WPS button and turn on your router.
  • Now keep holding until the power light stops flashing.
  • Finally, the Router will automatically reboot.

Resetting the D-Link router does now not reset the firmware to an earlier version. it will only change all settings.

Reset via Web-Based Configuration Utility

You ought to need basic knowledge about pc and browser to reset the D-Link router with a web-based configuration utility. you can without problems reset and reboot with this utility. You don’t want to download any software or tool for this method.

This reset method deletes all internet and wireless settings on your router

Reset via Web Based Configuration Utility

If the default IP, username and password do not work, look behind the router

Method – 1

  • Open any internet browser and enter the IP address
  • Subsequent, enter Username and Password.
  • Then pick the Administration option.
  • subsequent click restore/save/upload setting tab.
  • pick restore in factory default.
  • After that, pick out the ok option.
  • Your device will be rebooted.
  • Reset done on your D-Link router.

Method – 2

  • Open any net browser and enter the IP address.
  • Take a look at IP and login details below.
  • Subsequently, enter Username and Password
  • Then pick the maintenance option.
  • Subsequently, pick out the Backup Settings option.
  • Pick the Erase option below the Rivet factory default settings.
  • In this step, pick the yes option.
  • Your device will be rebooted.
  • Reset done on your D-Link router.

Access to the user interface

IP address: 192.168.1.1 (or http://www.routerlogin.net)
Username: admin
Password: admin

  • Verify that your router is currently turned on and plugged into a power source.
  • After that, establish a connection between the device and the router via network cable or WiFi
  • Subsequently, enter the IP address or URL in the address line.
  • Tap enter button on the keyboard.
  • In this step, enter the username and password in the open interface.
  • Now confirm once more.

Reboot your D-Link Router

Rebooting the router means cycling the power to it or refreshing the router. in case you need to reboot your router, observe these steps.

Method – 1

  • Unplug the power connector from the back of the router and plug it back in.
Router Power
  • In this step, wait above 20 seconds for the router to reboot.
  • Your internet connection may additionally drop when your wireless router reboots.

Method – 2

  • Go to the maintenance or tools tab.
  • After that, click save and restore settings or system options.
  • In this step, click on Rebooting or Reboot the device.
  • Finally, wait for a while, Now you’re achieved Rebooting successfully.

Leave a Reply