In this post, you can easily know about How To Log in To The EdgeRouter X. If your EdgeRouter X router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist.

Hard reset instructions for Ubiquiti Networks EdgeRouter X is Other scenarios where you might want to reset your router is if you’ve forgotten the password or misconfigured it and can’t get access anymore.

Hard reset instructions for Ubiquiti Networks EdgeRouter X

If your EdgeRouter X router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you’ve forgotten the password or misconfigured it and can’t get access anymore.

You can reset your Ubiquiti Networks EdgeRouter X in the following way(s):

The 30-30-30 reset

There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:

• When the router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)

• While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds

• While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to its factory setting.

Default factory settings for Ubiquiti Networks EdgeRouter X

If you have performed a reset of your EdgeRouter X device or not changed the defaults, you should be able to access it with the following settings:

• Default Gateway IP: 192.168.1.1 Ubiquiti Networks login instructions
• Default username: ubnt Ubiquiti Networks router
• Default password: ubnt
• Default subnet mask: 255.255.255.0
• Default DNS server: 192.168.1.1

How to login to the EdgeRouter X

To log in to the Advanced Gigabit Ethernet Router and change the settings, you can follow these steps:

• Make sure you are connected to the router’s network, either by Wi-Fi or Ethernet cable.
• Open your browser and visit http://192.168.1.1
• You should be prompted with a login dialogue.
• Enter the username: ubnt and the password ubnt
• Note: If you have already changed the password, use that instead.
• You will now be logged in. If you haven’t yet changed the default password, we recommend that you change it the first thing you do after logging in.

If these instructions don’t work for your router, you can always try a factory reset to get the default, or try some other common Ubiquiti Networks credentials, as they can usually be shared across models/variants.