In this post, you can easily know about How To Reset AT&T Router. Having an ATT Router or modem can fulfill all your networking requirements with ease.

If you’re having problems with your AT&T U-verse router, such as being unable to connect to the internet, try disconnecting it, waiting a few seconds, and then putting it back in. If it doesn’t work, you may try resetting it to factory defaults. If you have any difficulties or queries, or if your AT&T U-verse modem won’t reset, contact AT&T for assistance.

Before Performing ATT Router Reset

Since the router reset erases all your previous settings, it is recommended that you note down the existing router settings on a notepad, which you can refer to later while reconfiguring the device. To do this, you need to log in to the router admin console using the ATT Router IP address, the username, and the login password.

To start with the process, connect the router to your computer using either an Ethernet cable or wireless medium. Once the router and your computer establish a connection, follow the below-mentioned steps to log into the router admin console and note down the router settings:

• Open an internet browser on your computer.
• Type 192.168.1.1 in the browser’s address bar and press Enter to open the router login page.
• Enter the username and password in the required fields, and click on ‘Login’.
• Once you are logged into the router admin console, you can click on the various tabs and note down the settings on your notepad.

Why Do You Need to Reset AT&T Router?

Apart from losing or forgetting the login credentials of your AT&T Router, instances occur when you might see that the device is blinking a red or orange light. Such issues usually happen when the router is unable to communicate with the modem or if there’s any technical glitches at your ISP’s end.

In case there are no issues at the ISP’s end, you must check if the Ethernet cable connecting the router and your modem is in proper condition. If there are any physical damages to the Ethernet cable, you must replace it with a new one and check if the issue is resolved.

Alternatively, you can disconnect the router and modem power adapter from the electric socket, wait for about two minutes, and connect them back to turn on the devices. However, if changing the Ethernet cable or restarting the networking devices doesn’t resolve the blinking of the red or orange light, you need to reset the router.

How to Reset ATT Router?

Now that you are aware of the various instances where a router reset is necessary, read on to explore the series of steps involved in the process to reset ATT Router:

• Locate the router’s reset button. You can find it at the rear end of the router.
• Connect the router’s power adapter to an electric socket and turn it on.
• Press and hold the reset button for about 10 seconds using a pointed object, such as a paperclip.
• You will notice that the router’s status lights flicker and the router reboots, which means that the factory reset ATT Router is complete.

You Should Restart Your AT&T Wi-Fi Gateway

Consider resetting your AT&T Wi-Fi gateway or router if you’re having problems connecting to it from your home devices or can’t access the internet after you’re connected. To begin, disconnect the gadget from the wall or power strip it is connected to. You’ll also want to disconnect the phone connection from the device if it’s a digital subscriber line, or DSL, a modem that connects through a regular phone line.

Remove the internal battery if the router has one for backup, and unplug the router from all power sources. Make a mental note of how the battery goes into the gadget, so you can correctly replace it. If you’re not sure if it has a battery, read the paperwork that came with it or seek online using another device linked to the internet, such as a mobile phone connected to the cell network.

Wait 20 seconds after all power has been unplugged. Then, if you have one, replace the battery and reconnect the gadget to the phone line if necessary, as well as the power outlet. Return the gadget to its original location and wait up to 10 minutes for it to restart.

Reset the Factory Settings on Your Router

You can reset your router to factory settings if restarting it isn’t enough. Any custom modifications you’ve made to its setups, such as selecting a custom Wi-Fi network name or a specific IP address, will be lost.

Hold the reset button on the AT&T router for at least 10 seconds to restore factory settings. Wait for all the lights to turn green, then double-check that the broadband or status light remains solid green. The AT&T U-verse modem will not reset its factory settings if you don’t press the button down long enough, however it may reboot.

U-verse Modem Lights from AT&T

If your AT&T U-verse modem isn’t working, the lights on it might help you figure out what’s wrong. There are usually indicators that indicate the condition of the modem’s connection to Wi-Fi, electrical power, battery life, and the AT&T external network.

Each of these lights has a variety of color-coded states that may be used to show the device’s condition. To figure out what the lights are attempting to tell you, go to AT&T’s website and look up your modem’s online documentation.

Other Suggestions for Troubleshooting

If you’re an AT&T client who’s having problems with your internet router, you may always call AT&T for help. If you don’t have AT&T, contact your own internet provider.

To begin, it may be beneficial to try to narrow down the issue. Check to see whether several devices are experiencing issues connecting, or if only one is, in which case it might be a device issue. Check the modem lights to see what they’re reporting and see if it fits your experience.

You may also try changing any physical cords hooked into the router, such as phone and Ethernet connections, if they have been broken.

What should the lights on my ATT U-verse modem be?

The Wi-Fi Gateway is turned on if the power indicator is solid green. If the power light is blinking red, the machine is doing a self-test to ensure appropriate operation.

The solid red power light indicates a problem, it indicates a problem: the device is unable to boot up or a fault has occurred.